Lenovo THINKPAD Z60M - Manual (Page 87)

Table 28. Antidote Delivery Manager commands (continued)
Commands Description
STATUS [/QUERY location message_name | /CLEAR location] The STATUS /QUERY command can be used to
determine if a script has been run, or is queued to be
run. The location value must be one of the following:
v FAIL
the message has already run and failed
v SUCCESS
The message has been completed successfully
v WORK
The message is currently being run, or will run
next time Antidote Delivery Manager is run.
v CACHE
The message is queued to run.
The STATUS/CLEAR command will clear the location
specified. Return values are:
v 0 = if the specified message found or the command
completed successfully
v 1 = if the specified message not found or the
command failed
MAILMAN [/RRU | RESET | /MB mailbox | /STATUS This command checks for mailbox locations and
processes fixes found there. The following list
provides the parameters:
v RRU
This parameter runs .ZAP which is stored in the
Post Restore directory after each restore.
v RESET
This parameter halts processing of the currently
running script.
Note: This parameter should only be used in
extenuating circumstances since usage is likely to
cause errors.
v STATUS
This parameter returns a bitmask to indicate the
current condition of the Antidote program. Return
values are:
– 0 = Antidote is configured properly
– 1 = No mailbox defined
– 2 = There are no keys defined, or NOSIG=1 is
not defined
Supported Microsoft commands
The following table provides supported Microsoft commands:
Table 29. Supported Microsoft commands
Commands Description
ATTRIB.EXE Displays or changes file attributes.
CACLS.EXE Displays or modifies access control list (ACLs) of files.
CHKDSK.EXE Checks a disk and displays a status report.
Chapter 5. Antidote Delivery Manager infrastructure 81