Lenovo ThinkPad Edge 15 - Manual (Page 130)

Table 36. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Scheduler Schedule Task2 Day Of The Month If this task is configured as taking
effect monthly, this setting allows the
user to select the day of the month
when the task should take effect.
Default: 1.
Scheduler Schedule Task2 Day Of The Week If this task is configured as taking
effect weekly, this setting allows the
user to select the day of the week
when the task should take effect.
Default: 0.
Scheduler Schedule Task2 Hour If this task is configured as taking
effect hourly, this setting allows the
user to select the specific hour when
the task should take effect. Values:
0-23. Default: 0.
Scheduler Schedule Task2 Minute This setting allows the user to select
the specific minute when the task
should take effect. Values: 0-59.
Default: 0.
Scheduler Schedule Task2 Wake From Suspend or Hibernate Enable or disable the setting of
waking up your computer from
suspend mode or hibernating mode
when a scheduled task takes place.
Default: Never wake.
Scheduler Schedule Task2 Pre Command to run prior to the
Schedule Task2. Include the full path
to the file. Default: None.
Scheduler Schedule Task2 PreParameters Parameters to pass the command
that is run prior to the Schedule
Task2. Default: None.
Scheduler Schedule Task2 PreShow Show or hide the command that
is run prior to the Schedule Task2.
Default: Show.
Scheduler Schedule Task2 Post Command to run following the
Schedule Task2. Include the full path
to the file. Default: None.
Scheduler Schedule Task2 PostParameters Parameters to pass the command
that is run following the Schedule
Task2. Default: None.
Scheduler Schedule Task2 PostShow Show or hide the command that is
run following the Schedule Task2.
Default: Show.
Scheduler Schedule Task2 Task Command to run as the scheduled
backup task. Include the full path to
the file. Default: None.
Scheduler Schedule Task2 TaskParameters Parameters to pass the command
that is run for the scheduled task.
Default: None.
Scheduler Schedule Task2 CPU Priority Set the CPU priority of the scheduled
task. Values: 1-5 (1=Lowest Priority,
5=Highest Priority). Default: 3.
122 Rescue and Recovery 4.23 Deployment Guide