Lenovo ThinkPad Edge 15 - Manual (Page 125)

Table 36. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Rejuvenate PostRejuvenate
Parameters The parameter that passes the
command that is run following a
rejuvenation restore. Default: None.
Rejuvenate PostRejuvenate
Show Show or hide the command that is
run following a rejuvenation restore.
Default: Show.
Rejuvenate PostRejuvenate
Reboot Enable or disable a system reboot
following a rejuvenation restore.
Default: Enabled.
Mapped
Network Drive UNC UNC location for the mapped
network drive (format \\server\share).
Default: None.
Mapped
Network Drive User Set the user who logs in to the
mapped network drive. Default:
None.
Mapped
Network Drive Pwd Set the password used to log in to
the mapped network drive. Default:
None.
User
Messages Bootable Second Show or hide the Bootable Second
message. Default: Hide.
User
Messages Bootable USB Show or hide the Bootable USB
message. Default: Show.
User
Messages Location Not
Found Show or hide the Location Not Found
message. Default: Show Note: If the
location is a USB drive, this message
will still be displayed.
User
Messages Missed Backup Show or hide the Missed Backup
message. Default: Show.
User
Messages No Battery Show or hide the No Battery
message. Default: Show.
User
Messages Scheduled Base Show or hide the Scheduled Base
message. Default: Show.
User
Messages Power Loss
Backup Show or hide the Power Loss Backup
message. Default: Show.
User
Messages Post Rejuvenate
Reboot Show or hide the Post Rejuvenate
Reboot message. Default: Show.
Scheduler Scheduled Tasks Global Delay Start Minute Set the global delay start minute
of Scheduled Tasks. Values: 0-59.
Default: 5.
Scheduler Scheduled
Backups Day Of The Month If the scheduled backup mode is
configured as creating backups
monthly, this setting allows the user
to select which day of the month the
backups should be created. Default:
None.
Appendix A. Administrative tools 117