Lenovo ThinkPad Edge 15 - Manual (Page 116)

Table 36. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup Yield Yield indicates amount of delay to
insert between disk writes during
a backup. This permits system
backups from hogging all of the disk
i/o bandwidth. Values: 0-8 (0=off,
8=least disk activity) Default: 0.
Backup Boot Disc Enable or disable the creation of
a Boot Disc when backing up to
CD/DVD or creating an archive to
those media. Default: Enabled.
Backup VerifyDisc Enable or disable Verify Disc when
backing up to a CD/DVD or creating
an archive to those media. Default:
Enabled.
Backup Battery Percent
Required Battery Percent Required before
commencing a scheduled backup.
This policy ensures there is enough
battery power left to complete a
backup. Values: 0-100. Default: 0.
Backup Skip Locked Files Enable or disable Skip Locked Files
when backing up. If enabled, locked
files will not be backed up. Default:
Disabled.
Backup Min Percent Free
Space The minimum percent of free space
on the destination drive required for
backup. Values: 0-100. Default: 0.
Backup Protect With UUID Enable or disable the Protect With
UUID option. If enabled, this will
prevent the backups taken on one
machine from being restored on
another. Default: Disabled.
Backup Protect With
Password Enable or disable the Protect With
Password option. If enabled,
backups may be protected with a
password. Default: Disabled.
Backup Autosync Retry
Network Set the number of minutes before
the user will be prompted again after
the user chooses not to retry an
auto-synchronization to the network.
Restore PreRestore PreWinRestore Command to run prior to a restore
from Windows. Include the full path
to the file, if that path is not in the
environment variable. Default: None.
Restore PreRestore PreWinRestoreParameters The parameter that passes the
command that is run prior to a restore
from Windows. Default: None.
Restore PreRestore PreWinRestoreShow Show or hide the command that is
run prior to a restore from Windows.
Default: Show.
108 Rescue and Recovery 4.23 Deployment Guide