Lenovo ThinkPad Edge 15 - Manual (Page 128)

Table 36. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Scheduler Schedule
eGatherer Post Command to run following the
scheduled eGatherer capture task.
Include the full path to the file.
Default: None.
Scheduler Schedule
eGatherer PostParameters Parameters to pass the command
that is run following the scheduled
eGatherer capture task. Default:
None.
Scheduler Schedule
eGatherer PostShow Show or hide the command that is run
following the scheduled eGatherer
capture task. Default: Show.
Scheduler Schedule
eGatherer Task Command to run as the scheduled
backup task. Include the
full path to the file. Default:
%RR%\launcheg.exe".
Scheduler Schedule
eGatherer TaskParameters Parameters to pass the command
that is run for the scheduled
eGatherer capture task. Default:
None.
Scheduler Schedule
eGatherer CPU Priority Set the CPU priority of the scheduled
eGatherer captures. Values: 1-5
(1=Lowest Priority, 5=Highest
Priority). Default: 3.
Scheduler Schedule
eGatherer Scheduled eGatherer Capture Mode Select when and how often to run the
scheduled eGatherer capture task.
Default: 0x00000100.
Scheduler Schedule
eGatherer Number of Minutes If the scheduled eGatherer capture
mode is configured as taking effect
minutely, this setting allows the user
to select how many minutes will
elapse between the intervals of the
scheduled eGatherer capture task.
Values: 0 and up. Default: 0.
Scheduler Schedule
eGatherer Minimum Days Between Execution Set the minimum number of
days between the intervals of the
eGatherer capture tasks. Values: 0
and up. Default: 0.
Scheduler Schedule Task1 Day Of The Month If this task is configured as taking
effect monthly, this setting allows the
user to select the day of a month
when the task should take effect.
Default: 1.
Scheduler Schedule Task1 Day Of The Week If this task is configured as taking
effect weekly, this setting allows the
user to select the day of the week
when the task should take effect.
Default: 0.
Scheduler Schedule Task1 Hour If this task is configured as taking
effect hourly, this setting allows the
user to select the specific hour when
the task should take effect. Values:
0-23. Default: 0.
120 Rescue and Recovery 4.23 Deployment Guide