Sioux Chief 590-44 Series Suspended Anchoring System Sioux Chief Sammys User Manual
Mechanical anchors for thread rod, 44 series sioux chief sammys
SPECIFICATION
Sioux Chief Sammy Mechanical Anchors shall be used for suspended
applications where ⅜" threaded rod is used on wood, steel or concrete, in
either vertical or horizontal applications.
Sioux Chief Sammy XPress
®
anchors are specifically designed for use in
metal deck or Z-purlin applications. Swivel models are designed for extreme
or variant roof pitches.
INSTALLATION
These products should only be installed using original Sammy
®
nut drivers
and XPress
®
Nut drivers. Using any other tool voids warranty. When the
appropriate nut driver is used, the driver spins free on the screw after
installation is complete and eliminates the expected wrist snap, reduces
over-torque and prevents screw failure. Complete installation instructions
are provided in each box of product. Contact factory for more information.
MATERIALS
Due to variations of hardness of certain metals, it should be noted that self-
drilling screws for steel will experience different drill speeds. Drill speeds of
500–1500 RPM should be used.
590-44 series
Sioux Chief Sammys
®
MEChANICAL ANChORS FOR ThREAd ROd
MOdEL NuMbERS ANd LOAd RATINgS
Item No.
Description
Application
Testing
Appovals
Ultimate Pullout (lbs)
UL Test Load (lbs)
FM Test Load
(lbs)
590-4411
GST20 Vertical
Wood
1760 (fir)
850
1475
UL & FM
590-4411-3
GST30 Vertical
Wood
2060 (fir)
1500
1475
UL & FM
590-4421
SWG20 Horizontal
Wood
1725 (fir)
1050
UL
590-4421-3
SWG30 Horizontal
Wood
1884 (fir)
590-4412
CST20 Vertical
Concrete
2400*
1475
FM
590-4422
SWC20 Horizontal
Concrete
2450*
1475
FM
590-4413
DST20 Vertical
Steel
1500 (3/16")
1500
1475
590-4413-R
DSTR516 Vertical with nut
Steel
2200 (20 ga.)
1500
1475
UL & FM
590-4423
SWDR516 Horizontal with nut
Steel
2480 (20 ga)
1500
1475
UL & FM
590-4433
XP20 X-Press
Metal
Deck
1146 (22 ga)
850 (2½" pipe)
185 (luminaire)
250 (luminaire)
283 (conduit & cable)
940 (2" pipe)
1475 (4" pipe) UL & FM
590-4434
XP35 X-Press
Purlin
1783 (16 ga)
1250 (3½" pipe)
85 (luminaire)
250 (luminaire)
416 (conduit & cable)
940 (2" pipe)
1475 (4" pipe) UL & FM
590-4435
SXP20 Swivel X-Press
Metal
Deck
1061 (22 ga vertical)
829 (45° off vertical)
750 (2" pipe)
170 vert. (luminaire)
80 @ 45° off vert. (luminaire)
283 vert. (conduit & cable)
233 @ 45° off vert. (conduit
& cable)
635 (2" pipe) UL & FM
590-4436
SXP35 Swivel X-Press
Purlin
1675 (16 ga vertical)
1558 (89° off vertical)
1250 (3½" pipe)
250 vert. (luminaire)
80 @ 90°(luminaire)
500 vert. (conduit & cable)
333 @ 89° (conduit & cable)
635 (2" pipe) UL & FM
* Tested in 3000 PSI concrete
590-4411
590-4411-3
590-4421-3
590-4422
590-4413
590-4413-R
590-4421
590-4412
590-4423
590-4433
590-4436
Sioux Chief Manufacturing Company • tel: 1-800-821-3944 • www.siouxchief.com • fax: 1-800-758-5950
Item # Submitted �����������������������������������
Job Name �����������������������������������������
Location ������������������������������������������
Engineer ������������������������������������������
Contractor ����������������������������������������
PO# �������������������� TAG ���������������������
3-10