Norgren Filter Contents - Manual (Page 44)

F72V Oil Vapor Removal Filter
Littleton, CO USA Phone 303-794-2611 www.norgren.com ALE-3-3
Technical Data
Fluid: Compressed air
Maximum pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*
Transparent bowl: 0° to 125°F (-20° to 50°C)
Metal bowl: 0° to 150°F (-20° to 65°C)
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).
Required prefilter: Norgren oil removal filter with equivalent pipe size and flow
capacity equal to or greater than the vapor removal filter.
Air quality: Within ISO 8573-1, Class 1** (oil content) when installed downstream of
an oil removal filter
** See ALE-1-G for specification details.
Maximum remaining oil content in outlet air: 0.003 ppm at 70°F (20°C)
Maximum flow at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal
performance: 3.4 scfm (1.6 dm 3 /s)
Nominal bowl size
2.2 fluid ounce (65 ml)
Materials
Body: Zinc
Bowl
Transparent: Polycarbonate
Guard for transparent bowl: Zinc
Metal: Zinc
Element: Activated carbon and polycarbonate
Elastomers: Nitrile
Typical Performance Characteristics
PORT SIZE: 3/8"
FLOW CHARACTERISTICS
0 1 2 3 4 5 dm 3 /s
AIR FLOW
0 2 4 6 8 10 scfm
0.4
0.3
0.2
0.1
0
PRESSURE DROP
bar d
5
4
3
2
1
0
psid 36
(2.5)
58
(4.0)
91
(6.3)
Maximum flow to
maintain stated oil
removal performance
116
(8) INLET PRESSURE: psig (bar)
150
(10)
1.97 (50)
1.89 (48)
Long Bowl
4.88 (124)
7.28 (185)
0.75 (19)
Service kit includes element seal and bowl seal.
Service Kits
Item Type Part Number
Service kit Seal and Gasket 4380-500
Replacement element Adsorbing 4241-01
† Minimum clearance required to remove bowl.
All Dimensions in Inches (mm)