1 recommendations for best performance, 2 safety instructions, Recommendations for best performance – Kramer Electronics VP-16x18AK User Manual
Page 9: Safety instructions
Overview
5
5
You can operate the VP-16x18AK using the front panel buttons, or
remotely via:
• RS-485, RS-232 serial or Ethernet TCP/UDP commands (using
Kramer 2000 and 3000 protocols) transmitted by a touch screen
system, PC or other serial/Ethernet controller
• The Kramer Infrared Remote Control transmitter or Infrared remote
extension cable transmitter (optional)
• Your Web browser using Ethernet communication over a LAN
The VP-16x18AK is dependable, rugged and fits into three vertical spaces
(3U) of a standard 19” professional rack.
3.1
Recommendations for Best Performance
To achieve the best performance:
• Use only high quality connection cables
• Do not secure the cables in tight bundles or roll the slack into tight
coils
(we recommend Kramer
high-performance, high-resolution cables) to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
• Avoid interference from neighboring electrical appliances that may
adversely influence signal quality
• Position your Kramer VP-16x18AK away from moisture, excessive
sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
3.2
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the power cord that is supplied with the unit
Warning:
Do not open the unit. High voltages can cause electrical
shock! Servicing by qualified personnel only
Warning:
Disconnect the power and unplug the unit from the wall
before installing
1 Available from Kram
!
!