Kramer Electronics VP-16x18AK - Manual (Page 34)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-16x18AK Remotely Using a Web Browser
30
9.2.1 Switching an Input to an Output
To switch an input to an output, for example, video input 1 to video
output 4:
1. Click the blue Video button.
The button outline becomes dark. Actions now relate to video
channels.
2. Click the required square within the switching matrix grid (In 1,
Out 4).
Figure 15: Selecting a Switching Point on the Matrix
A blue video icon appears indicating that the video channel is
switched to In 1 and Out 4.
Figure 16: Switching an Input to an Output
3. Repeat the above steps for each video and audio (clicking the purple
Audio button for audio mode) channel that you want to switch.
9.2.2 Setting the AFV Mode
Audio channel In 1 is currently switched to Out 4.
To set the AFV mode:
1. Click the AFV button.
The following warning appears.