Festo Амортизаторы YSRWJ - Manual (Page 21)

YSRWJ-...-A
Festo YSRWJ-...-A 0008NH English
21
10 Eliminating faults
Fault Possible cause Remedy
Hard knocking in
t k d iti
Shock absorber defective Replace shock absorber
stroke end position
Positioning element over-
loaded Reduce the impact speed
Loud knocking at
start of stroke Rubber buffer worn Replace rubber buffer
(only with YSRWJ-7/8-...)
Faults in position
interrogation Position of proximity switches
incorrect Correct position of proximity
switches
Incorrect type of proximity
switched used Use only proximity switches of
type SME/SMT-8-...-B
Proximity switch defective Replace proximity switch
Ferritic parts in vicinity of
proximity switch Use parts made of non-
magnetic materials
Fig. 17