Disassemble the liquid end – Goulds Pumps 3296 EZMAG - IOM User Manual

Page 58

Text mode
Original mode

Maintenance

Disassemble the liquid end

1. Remove the hex screws (370) that hold the adapter to the case.

1. Adapter-to-case hex screw (370)
2. Frame adapter (108)
3. Backplate-to-case gasket (351)
4. Casing (100)

NOTICE:
Do not remove the three setscrews (222E on the 6 in. S-group, 3 x 4-7, and 3 x 4-8G) or
two hex screws (370V on all other sizes). These setscrews hold the adapter (108),
backplate (444), and containment shell (750).

1. Adapter-to-backplate setscrew 222E (6 in. S-group, 3 x 4-7, and 3 x 4-8G)
2. Containment shell gasket (540N)
3. Containment shell (750)
4. Frame adapter (108)
5. Adapter-to-backplate hex screw (370V)

2. Remove the entire assembly from the casing (100).
3. If you need to remove the assembly from the casing, insert jackscrews through the

threaded holes in the adapter (108).

Model 3296 EZMAG Installation, Operation, and Maintenance Manual