Goulds Pumps 3296 EZMAG - IOM - Manual (Page 56)

Maintenance
12. Remove the drive shaft with both bearings attached.
1. Labyrinth oil seal (333D)
2. Bearing frame (228)
3. Drive with shaft bearings
13. Remove the labyrinth oil seals (332A and 333D).
14. Remove both radial ball bearings using a press.
The radial ball bearings lie against the shaft collar.
Remove the frame assembly and shaft (close-coupled pump)
1. Secure the complete pump on a workbench in either a horizontal or a vertical position.
2. Remove the hex screws (370B) that hold the motor adapter (503) to the frame adapter
(108).
1. Frame-to-adapter hex screw (370B)
2. Close-coupled adapter (503)
3. Frame-to-adapter gasket (360W)
3. If necessary, remove the motor adapter (503) from the frame adapter (108) using two
levers or pry-bars.
54 Model 3296 EZMAG Installation, Operation, and Maintenance Manual