Goulds Pumps 3296 EZMAG - IOM User Manual

Page 55

Maintenance

8. Remove the capscrew (791D) and the lockwasher (382) from the drive shaft.

1. Frame assembly
2. Drive carrier assembly (740B)
3. Internal tooth lockwasher (382)
4. Drive-to-shaft capscrew (791D)

9. Remove the drive magnet assembly (740B).
10. Remove the bearing-end cover screws (370C) and the bearing-end cover (109A).

1. Frame
2. End cover gasket (360A)
3. Wave washer (529)
4. Frame end cover (109A)
5. End cover hex screw (370C)
6. Labyrinth oil seal (332A)

11. Remove the wavy spring washer (529) and end-cover gasket (360A).

Model 3296 EZMAG Installation, Operation, and Maintenance Manual