Goulds Pumps 3296 EZMAG - IOM User Manual

Page 57

Maintenance

There are also two threaded holes (size M12) in the close-coupled motor adapter (503) for
jackscrews.

4. Lift the motor and motor adapter assembly off the frame adapter.

Use a crane, if necessary.

5. Remove the gasket (360W).
6. Remove the hex screw (791D) and lockwasher (382) from the drive magnet (740B).
7. Remove the drive magnet (740B) from the stub shaft (122A).

1. Stub shaft–to-motor setscrew (222L)
2. Shaft (122A)
3. Motor-to-adapter hex screw (371)
4. Frame-to-adapter hex screw (370B)
5. Close-coupled adapter (503)
6. Frame-to-adapter gasket (360W)
7. Drive carrier assembly (740B)
8. Drive-to-adapter capscrew (791D), internal tooth lockwasher (382)

8. Remove the hex screws (371) that hold the motor to the motor adapter (503).
9. Pull the motor adapter (503) off the motor flange.
10. Loosen the setscrew (222L) that holds the stub shaft onto the motor shaft.
11. Remove the stub shaft (122A) from the motor.

Model 3296 EZMAG Installation, Operation, and Maintenance Manual