Beijer Electronics SCOM Protocol EN - Manual (Page 87)

Command Reference
Elektronik-Systeme Lauer, MAEN976 87
6.42 LAU_CONFIG_GETECDISCOLOURTEMP
(0x0117)
ECDIS Default Color Temperature
If ECDIS mode is enabled, the backlight and video controller are configured with
predefined settings. This command returns the predefined color temperature used to
setup the video controller in ECDIS mode.
Supported since Firmware Version
MT223 NAV-230G: 1.0
MT226 NAV-230G: 1.0-DSCALE2
Command Stream
Response Message (Acknowledge)
Maximum Lr for this Command
9
0 1 2 3 4 5 6 7...8 9
0x07 ADR 0x4C 0x41 0x55 0x02 ICHKH 0x01 0x17 ICHKD
0 1 2 3 4 5 6 7 8
0x06 ADR 0x4C 0x41 0x55 0x01 ICHKH Ret ICHKD
MT223 NAV-230G
Ret
Value: 0: 9300K
1: 7300K
3: 5000K
4: USER
Type: Byte
Length: 1
Description: Color temperature used in ECDIS mode
MT226 NAV-230G
Ret
Value: 0: DEFAULT
1: 4200K
2: 5000K
3: 5400K
4: 6500K
5: 7200K
6: 9300K
7: 12000K
8: USER
Type: Byte
Length: 1
Description: Color temperature used in ECDIS mode