Beijer Electronics SCOM Protocol EN - Manual (Page 76)

Command Reference
76 Elektronik-Systeme Lauer, MAEN976
6.32 LAU_CONFIG_GETDEVICENAME
(0x010D)
Device Name
Returns the monitor type and model. Actually, this command returns the same value
as the standard SCOM command “TYP”.
Supported since Firmware Version
MT223 NAV-230G: 1.0
MT226 NAV-230G: 1.0-DSCALE2
Command Stream
Response Message (Acknowledge)
Response Message (Negative Acknowledge)
Under normal operation conditions, a device never sends a negative acknowledge in
response to this command.
Maximum Lr for this Command
23
Example
Query the unit type and model of the monitor at address 0.7 (group 0, address 7):
According to the data returned by the monitor at address 0.7 (group 0, address 7),
this is a Lauer Navigation Monitor model “MT223 NAV-230G”:
0 1 2 3 4 5 6 7...8 9
0x07 ADR 0x4C 0x41 0x55 0x02 ICHKH 0x01 0x0D ICHKD
0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]
0x06 ADR 0x4C 0x41 0x55 LEN ICHKH Ret ICHKD
Ret
Value: ASCII characters
Type: String
Length: 0...15
Description: Monitor type and model
0 1 2 3 4 5 6 7...8 9
0x07 0x07 0x4C 0x41 0x55 0x02 0x0D 0x01 0x0D 0xF1
0 1 2 3 4 5 6 7...20
0x06 0x07 0x4C 0x41 0x55 0x0E 0x02 0x4D 0x54 0x32 0x32
7...20 21
0x33 0x20 0x4E 0x41 0x56 0x2D 0x32 0x33 0x30 0x47 0xB9