Beijer Electronics SCOM Protocol EN - Manual (Page 33)

Command Reference
Elektronik-Systeme Lauer, MAEN976 33
Example 3
Decrement the current contrast level of monitor at address 0.7 (group 0, address 7):
Monitor at address 0.7 (group 0, address 7) has returned the new contrast level 196
(0xC4):
Example 4
Reset the contrast level of monitor at address 0.7 (group 0, address 7):
Monitor at address 0.7 (group 0, address 7) has returned the default contrast level
128 (0x80):
0 1 2 3 4 5 6 7...9 10
0x07 0x07 0x4D 0x43 0x43 0x03 0x1B 0x82 0x41 0x2D 0x0F
0 1 2 3 4 5 6 7...11 12
0x06 0x07 0x4D 0x43 0x43 0x05 0x1A 0x82 0x41 0x2D 0x43 0x34 0x98
0 1 2 3 4 5 6 7...9 10
0x07 0x07 0x4D 0x43 0x43 0x03 0x1B 0x82 0x41 0x52 0xEA
0 1 2 3 4 5 6 7...11 12
0x06 0x07 0x4D 0x43 0x43 0x05 0x1A 0x82 0x41 0x52 0x38 0x30 0x82