Beijer Electronics SCOM Protocol EN - Manual (Page 115)

Command Reference
Elektronik-Systeme Lauer, MAEN976 115
6.61 LAU_CONTROL_LCDCONTROLDISABLE
(0x0205)
Video Controller Mode Control
This command enables or disables the OSD (video controller) keys (i.e.
Supported since Firmware Version
MT223 NAV-230G: 1.0
MT226 NAV-230G: 1.0-DSCALE2
Command Stream
Response Message (Acknowledge)
Response Message (Negative Acknowledge)
Under normal operation conditions, a device never sends a negative acknowledge in
response to this command.
Maximum Lr for this Command
11
0 1 2 3 4 5 6 7...9 10
0x07 ADR 0x4C 0x41 0x55 0x03 ICHKH 0x02 0x05 Param ICHKD
Param
Value: 0x00: Enable OSD keys
0x01: Disable OSD keys
Type: Byte
Length: 1
Description: OSD (video controller) key configuration
0 1 2 3 4 5 6 7...9 10
0x06 ADR 0x4C 0x41 0x55 0x03 ICHKH 0x02 0x05 Ret ICHKD
Ret
Value: 0x00: OSD keys enabled
0x01: OSD keys disabled
Type: Byte
Length: 1
Description: OSD (video controller) keys configuration