Specifications – Vaddio BRC-H900 Operating User Manual
Page 80
A
ppe
ndix
Specifications
GB
80
Specifications
System
Video signal
1080/59.94i, 1080/50i, 720/59.94p,
720/50p (switched with the
BOTTOM switch)
Synchronization
Internal/external synchronization,
automatically switched
Image device
1/2 type (8.0 mm), 3CMOS pickup
element
Total picture elements: Approx.
3,010,000 pixels
Effective picture elements: Approx.
2,070,000 pixels
Lens
14× (optical)
Filter diameter: 77 mm (Wide/tele
conversion lens cannot be attached.)
f = 5.8 to 81.2 mm, F1.9 to F16
f = 31.4 to 439 mm (equivalent to the
focal length of a 35-mm camera)
Minimum object distance
800 mm (31
1
/
2
inches)
Minimum illumination
4 lux (F1.9) with 50 IRE (WIDE end)
Shutter speed
1/60 (1/50 for 1080/50i or 720/50p
format) to 1/8,000 sec.
Video S/N
50 dB (Typical) (component Y signal
output)
Pan/tilt action
Horizontal: ±170 degrees
Maximum panning speed: 60
degrees/sec.
Minimum panning speed: 0.22
degrees/sec.
Vertical: +90 degrees, -30 degrees
Maximum tilting speed: 60 degrees/
sec.
Minimum tilting speed: 0.22
degrees/sec.
Input/output connectors
Video output
RGB/COMPONENT (D-sub 15-pin)
RGB: 0.7 Vp-p (no sync, at 75-ohm
termination)
1 Vp-p (±0.3 V, tri-level sync,
at 75-ohm termination)
Component:
Y: 1 Vp-p (±0.3 V, tri-level sync,
at 75-ohm termination)
Pb/Pr: ±350 mVp-p, 75-ohm
terminated
HD/VD Sync: 1 Vp-p, 75-ohm
terminated
Tri-level Sync: ±300 mVp-p, 75-
ohm terminated
VIDEO (BNC type)
Composite: 1 Vp-p (sync negative,
at 75-ohm termination)
S VIDEO (mini DIN 4-pin)
S video output:
Y: 1 Vp-p (sync negative, at 75-ohm
termination)
C: Same as chroma level of
composite signal (at 75-ohm
termination)
SDI OUT (BNC type, HD/SD
switchable) Conforms to SMPTE
292/259M
External sync input
EXT SYNC IN: BNC type
Control input/output
VISCA RS-232C IN: Mini DIN 8-pin
type
VISCA RS-232C OUT: Mini DIN 8-
pin type
VISCA RS-422: 9-pin type
Control signal format
9600 bps/38400 bps
Data: 8 bit
Stop bit: 1
Power connector
JEITA type4 (DC IN 12V)
General
Input voltage
12 V DC (10.8 V to 13.2 V DC)
Current consumption
2.4 A max. (at 12 V DC), 28.8 W
without optional Interface Card
Operating temperature
0 ºC to 40 ºC (32 ºF to 104 ºF)
Storage temperature
–20 ºC to +60 ºC (-4 ºF to +140 ºF)
Dimensions
Video camera: 198 mm × 260 mm ×
238 mm (7
7
/
8
in × 10
1
/
4
in × 9
3
/
8
in) (w/h/d) (excluding protruding
parts)
Remote Commander: 56 mm × 26 mm
× 210 mm (2
1
/
4
in × 1
1
/
16
in ×
8
3
/
8
in) (w/h/d)
Mass
Video camera: Approx. 5.0 kg (11 lb
0.37 oz)
Remote Commander: 110 g (3.9 oz)
Installation angle
Less than ±15 degrees to the horizontal
surface