Vaddio BRC-H900 Operating - Manual (Page 28)

Ov
er
v
ie
w
Location and Function of Parts
GB 28
When a BRBK-HSD2 is installed in the
BRU-SF10 card slot
a: Menu is superimposed on image
×: Menu is not superimposed on image
1)
When the DATA MIX switch on the front panel of the
BRU-SF10 HD Optical Multiplex Unit is set to ON,
the menu display is overlapped on all images output
from the card. When the DATA MIX switch is set to
OFF, the menu is not displayed.
BRBK-SA1 Analog SD Output Card
(not supplied)
A T VIDEO connector (BNC type)
Supplies analog composite signals. The aspect ratio
can be configured in the SD menu of the camera.
B
S VIDEO connector (4-pin mini-DIN)
Outputs S-Video signals. You can configure the
aspect ratio with the SD menu of the camera.
C
RGB/SYNC connector (D-sub 9-pin)
Supplies various analog signals such as composite
video, S video, component video and RGB signals.
The output signal can be selected in the SD menu of
the camera.
Notes
• When a BRBK-SA1 Analog SD Output Card is
installed in the BRC-H900 HD Color Video Camera
and menu display for the camera is turned ON, the
menu display is overlapped with the image.
• When a BRBK-SA1 Analog SD Output Card is
installed in a BRU-SF10 HD Optical Multiplex Unit
on which the front panel DATA MIX switch is set to
ON and menu display for the camera is turned ON, the
menu display is overlapped with the image. When the
DATA MIX switch is set to OFF, the menu will not be
displayed on the image, even if menu display for the
camera is turned ON.
BRBK-HSD2
panel switch MONITOR
connector SDI connectors
1, 2
Left position HD/
DATA MIX: ON
(HD-SDI output)
a
Middle position HD/
DATA MIX: OFF
(HD-SDI output)
a ×
Right position SD
(SD-SDI output)
a/× 1)
RGB/SYNC
BRBK-SA1
VIDEO S-VIDEO
1 2 3