Vaddio Canon XU-81 User Manual

Xu-81, Anon, Emote

ANON

XU-81

EMOTE

ONTROL

PTZ

AMERAS

 XU-81W Remote Control PTZ

Camera with Wiper and
Remote Controlled ND Filter

PN: 999-4180-000W (North America) & 999-4181-001W (Int’l)

 XU-81 Remote PTZ Camera

PN: 999-4180-000 (North America) & 999-4181-001(Int’l)

What’s included with the Canon XU-81W with Remote Controlled Wiper and ND Filter

Canon XU-81W - North America

Canon XU-81W - International

Part Number: 999-4180-000W

Part Number: 999-4180-001W

One (1) Canon XU-81W Camera

One (1) Rear Panel Connector Boot

One (1) 12VDC 3.0A Power Supply

One (1) North American Power Cable

One (1) Euro Power Cord

One (1) Control Adapter

One (1) UK Power Cord

One (1) Canon Operation Manual and Installation Manual

One (1) Control Adapter

One (1) Vaddio™ Quick-Start Guide

One (1) Canon Operation Manual and Installation Manual

One

(1)

Vaddio

Quick-Start

Guide

What’s included with the Canon XU-80 Remote PTZ Camera (no wiper)

Canon XU-81 - North America

Canon XU-81 - International

Part Number: 999-4181-000

Part Number: 999-4181-001

One (1) Canon XU-81 Camera

One (1) Rear Panel Connector Boot

One (1) 12VDC 3.0A Power Supply

One (1) North American Power Cable

One (1) Euro Power Cord

One (1) Control Adapter

One (1) 6’ UK Power Cord

One (1) Canon Operation Manual and Installation Manual

One (1) Control Adapter

One (1) Vaddio Quick-Start Guide

One (1) Canon Operation Manual and Installation Manual

One (1) Vaddio Quick-Start Guide

Overview

The XU-81 has a single 1/3-inch CMOS imaging sensor with 2.1 Megapixels. Using a Canon 20x HD Zoom Lens, it captures
exceptional, high-quality images in full-HD format. Dynamic Range Compensation allows for shooting in environments with a
high contrast of light and shade. The XU-81 incorporates high operability optimized for broadcast applications. The camera
head pans and tilts very smoothly while simultaneously zooming, allowing for on-air movements similar to manually-operated
cameras. The XU-81 has an HD-SDI output, the standard in the broadcast market, which enables it to provide high-quality
video at distances up to 100m (328.084123’).

Both the XU-81W and the XU-81 are dustproof and waterproof with an IP55 enclosure rating. Both cameras support upright or
inverted mounting and the picture will automatically flip when the tilt angle reaches 90 degrees. The user can select between
1080i and 720p output modes as well as switch between RS-422 and RS-232 for control.

INTENDED USE
Before installing the Camera, please read the manuals thoroughly. Use only the Vaddio power supply provided with the XU-
81 or XU-81W. Use of any unauthorized power supply will void any and all warranties.

IMPORTANT SAFEGUARDS
Read and understand all instructions before using. Do not operate any electrical device if it has been dropped or damaged. In
this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not
immerse in water or other liquids and avoid extremely humid conditions.

Quick-Start Guide

XU-81W

XU-81

Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not work
well for professional installations and can be the cause of intermittent connections which can result in
the RS-232 control line failing and locking up, and/or compromising the HSDS™ differential video. For
best results please use standard RJ-45 connectors and test all cables for proper pin-out prior to
termination.