American Power Conversion PD150G6F - Manual (Page 9)

150kW InfraStruXure PDU—Operation and Configuration 1
Safety
Overview
Save these instructions
This manual contains important instructions that must be followed during installation, operation, and
configuration of the InfraStruXure PDU.
Safety symbols used in this manual
Cross-reference symbols used in this manual
Electrical
Hazard
Indicates an electrical hazard, which, if not avoided, could result in injury or
death.
Warning
Indicates a hazard, which, if not avoided, could result in personal injury or
damage to the product or other property.
Caution
Indicates a potential hazard which could result in damage to product or other property.
Note
Indicates important information.
Heavy
Indicates a heavy load that should not be lifted without assistance.
Indicates a standby state. When in standby, the unit is not operating, but it may still
contain hazardous voltage. It is not safe to service until the equipment is disconnected
from all sources of electrical power.
Indicates that more information is available on the same subject in a different section of
this manual.
See also
Indicates that more information is available on the same subject in a different manual.