American Power Conversion PD150G6F - Manual (Page 20)

Overview: InfraStruXure PDU
12 150kW InfraStruXure PDU—Operation and Configuration
User connection plate
For a description and location of the user connection plate, see () on page 6. For clarity, the user
connection plate in the illustration below is shown in greater detail.
 Connect the InfraStruXure PDU to the network or the InfraStruXure Manager through the
ethernet port.
 The user connection plate has four input contact connections for monitoring Normally
Open (NO) or Normally Closed (NC) dry contacts. See page 20 and page 58 for more
information.
 The user connection plate has four relay output connections for connection of Normally
Open (NO) or Normally Closed (NC) dry contacts. See page 20 and page 58 for more
information.
 Connect an Emergency Power Off (EPO) switch at one of three choices of EPO
connections (24VDC, 24VAC, or contact closure). See page 60 for more information.