L 60 – Panasonic HX-A500H User Manual
Page 60
- 60 -
Enter a PIN code to set the Wi-Fi connection
1
Select [PIN code] and press the joystick in Step 4.
2
Select the wireless access point to be connected, then press the joystick.
≥ To run a wireless access point search again, move the joystick left, select [PIN code], then press
the joystick.
3
Enter the PIN code displayed on this unit screen into the wireless access point.
≥ For further details, please read the operating instructions for the wireless access point. (When
using a tethering connection, please read the operating instructions for the smartphone.)
4
Select [NEXT], then press the joystick.
≥ When the connection is complete, a message will be displayed and the screen will return to the
connection destination setting screen. Select [EXIT], then press the joystick to finish the setup.
≥ A message is displayed when the connection attempt fails. Press the joystick to exit, then set the
connection again.
≥ Confirm Encryption key (Password) of the selected wireless access point if the network
authentication is encrypted.
1
Press the joystick to select the menu.
(When setting a connection destination in [LIVE CAST])
(When setting a connection destination in [Wireless Network Mode])
2
Select [New], then press the joystick.
≥ To delete a wireless access point (
≥ To change the search order of wireless access points (
)
3
Select [Manual Connection], then press the joystick.
4
Select [Search for wireless network], then press the joystick.
5
Select the wireless access point to be connected, then press the joystick.
≥ To run a wireless access point search again, move the joystick left, select [Search for wireless
network], then press the joystick.
Confirming that the Wi-Fi connection is complete
j
is displayed on the screen
Searching for wireless access points to set up a connection
[Wi-Fi SETUP]
# [LIVE CAST SETUP] # [SET CONNECT. DEST.]
[Wi-Fi SETUP]
# [WirelessNetworkModeSetup] # [SET CONNECT. DEST.]
A
[New]
B
[ACCESS PRIORITY]
C
[Return]
D
[Delete]
E
[EXIT]
(Example: In [LIVE CAST] mode)