Picture size, Angle of view, Delay-start rec – Panasonic HX-A500H User Manual
Page 33
- 33 -
The higher the number of pixels, the higher the clarity of the picture when printing.
≥ This unit can record still pictures of the 16:9 aspect ratio.
≥ Set [RECORDING MODE] to [PICTURE RECORDING]. (
)
≥ [16.3M] is not available when the [ANGLE OF VIEW] is set to [STANDARD].
≥ [8.3M] is not available when the [IMAGE STABILIZATION] is set to [ON].
≥ If you set [ANGLE OF VIEW] to [STANDARD] when [16.3M] is set, [PICTURE SIZE] will switch to
[8.3M].
≥ If you set [IMAGE STABILIZATION] to [ON] when [8.3M] is set, [PICTURE SIZE] will switch to
[5.3M].
≥ The recording will become longer depending on the recording pixels.
≥ The edges of still pictures recorded on this unit with a 16:9 aspect ratio may be cut at printing.
Check the printer or photo studio before printing.
You can switch the angle of view mode.
≥ This item cannot be set in the following cases:
j During recording
j When [RECORDING MODE] is set to [SLOW MOTION]
j When [PIXELS / FRAME RATE] is set to [3840k2160/30p]
≥ If you set the [ANGLE OF VIEW] to [STANDARD] and set [IMAGE STABILIZATION] to [ON], the
angle of view becomes narrower.
≥ The options are not displayed as menu items on the “Image App”. Tap the angle of view mode on
the recording screen to switch the setting. (
)
You can start recording a motion picture approximately 3 seconds after pressing the recording start/
stop button.
≥
appears on the screen.
≥ The elapsed recording time (
) starts counting time as recording starts.
≥ This item cannot be set in [PICTURE RECORDING].
[PICTURE SIZE]
[16.3M]/[8.3M]/[5.3M]
[ANGLE OF VIEW]
[WIDE]:
Displays subjects from a wider range on the screen.
[STANDARD]:
Standard screen
[Delay-Start REC]