Panasonic HX-A500H User Manual
Page 45
- 45 -
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
∫ If the device is Android (non-NFC-compatible) or iOS
1
Set [Wi-Fi MODE] to [Smartphone Direct Connect]. (
≥ Confirm that the Wi-Fi mode has started up in [Smartphone Direct Connect].
2
On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
3
(When connecting for the first time)
Enter the Password displayed on this unit’s screen on the smartphone.
≥ You are not required to enter the Password from the second time you use the connection.
4
Start up the smartphone application “Image App”.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit [Smartphone Direct Connect]:
Move the joystick left.
≥ The message is displayed. Select [YES], then press the joystick to exit.
∫ If the connection between this unit and the smartphone has been
interrupted
The connection between this unit and the smartphone may be interrupted temporarily depending on
radio wave conditions.
An attempt to reconnect is made automatically when radio wave interference, etc. is eliminated.
Please note the following.
≥ If you have been recording a motion picture or recording in the [INTERVAL REC MODE], the recording
will continue even after the connection interruption. To stop the recording, operate this unit.
≥ If “Image App” has been used in Playback mode, if reconnecting takes 30 seconds or more, this
unit turns to Recording mode and “Image App” will run in Recording mode after the connection is
restored.
≥ If this unit has been deleting files, performing [Split & Delete] or formatting, the operation will
continue even after the connection interruption.
Do not remove the microSD card while the Access lamp of this unit lights.
≥ If you touch an NFC-compatible smartphone on this unit, you can register up to five smartphones.
When the number exceeds five, registrations will be deleted, starting from the oldest touched one.
≥ Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.
≥ If this unit and the smartphone are too far apart from each other when making the settings, the
connection may not be established. Move the devices closer to each other before making the
settings.
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Confirming that the Wi-Fi connection is complete
j
is displayed on the screen