L 36 – Panasonic HX-A500H User Manual
Page 36
- 36 -
This makes the image brighter to prevent darkening of a backlit subject.
≥ It cannot be set when the [COLOR NIGHT REC] is set to [ON].
This function allows you to record color images in very low light situations.
≥ It cannot be set when [RECORDING MODE] is set to [SLOW MOTION].
≥ Recorded image is seen as if frames were missed.
≥ If set in a bright place, the screen may become washed out for a while.
≥ Bright dots that are usually invisible may be seen, but this is not a malfunction.
≥ [WHITE BALANCE] setting cannot be changed while this function is activated.
You can set whether or not to record sounds during recording.
≥ This item cannot be set when the [RECORDING MODE] is set to [SLOW MOTION] or [PICTURE
RECORDING].
This reduces noise of the wind picked up by the built-in microphone.
≥ This function’s default setting is [OFF].
≥ It may not reduce noise of the wind sufficiently, depending on the recording situation.
≥ This function is not available in [PICTURE RECORDING] or when [MICROPHONE] is set to
[OFF].
You can check if the image is level on the recording screen of the “Image App”. The function can
also be used to estimate the balance of the composition.
≥ Use the “Image App”. This function cannot be enabled on this unit.
≥ The guidelines do not affect the actual images that will be recorded.
≥ The guidelines are not displayed on the screen of this unit.
You can add a sound when recording still pictures.
≥ Set [RECORDING MODE] to [PICTURE RECORDING]. (
)
[BACKLIGHT COMPENS.]
[COLOR NIGHT REC]
[MICROPHONE]
[ON]:
Records sounds.
[OFF]:
Does not record sounds.
[WIND CUT]
[Shooting guidelines]
[SHTR SOUND]
[HIGH]/[LOW]/[OFF]