Connecting to a wireless access point, Wps connection, L 59 – Panasonic HX-A500H User Manual
Page 59
- 59 -
Connecting to a wireless access point
≥ The number of wireless access points you can register differs depending on the Wi-Fi mode.
In [LIVE CAST], you can register up to three wireless access points; in [Wireless Network Mode],
you can register only one access point.
≥ In [LIVE CAST], this unit will try to connect to the first wireless access point, and if the attempt
fails, it will try to connect to the second one, and so on.
≥ For information on how to set the items with the “Image App”, refer to [Help] in the “Image App” menu.
Check if the wireless access point you are using is compatible with WPS
j If the wireless access point is compatible with WPS:
Proceed to the following [WPS Connection]
j If the wireless access point is not compatible with WPS:
Proceed to “Searching for wireless access points to set up a connection” (
1
Press the joystick to select the menu.
(When setting a connection destination in [LIVE CAST])
(When setting a connection destination in [Wireless Network Mode])
2
Select [New], then press the joystick.
≥ To delete a wireless access point (
≥ To change the search order of wireless access points (
)
3
Select [WPS Connection], then press the joystick.
4
Set the wireless access point to waiting for WPS.
≥ For further details, please read the operating instructions for the wireless
access point. (When using a tethering connection, please read the
operating instructions for the smartphone.)
≥ When the connection is complete, a message will be displayed and the
screen will return to the connection destination setting screen. Select
[EXIT], then press the joystick to finish the setup.
≥ A message is displayed when the connection attempt fails. Press the
joystick to exit, then set the connection again.
[WPS Connection]
[Wi-Fi SETUP]
# [LIVE CAST SETUP] # [SET CONNECT. DEST.]
[Wi-Fi SETUP]
# [WirelessNetworkModeSetup] # [SET CONNECT. DEST.]
A
[New]
B
[ACCESS PRIORITY]
C
[Return]
D
[Delete]
E
[EXIT]
(Example: In [LIVE CAST] mode)