Sony PCG-R505ECP - Manual (Page 66)

VAIO® Computer User Guide
66
To connect a projector (such as a Sony LCD Projector) to your docking station
1 Make sure the projector is plugged into an AC outlet.
2 Open the rear panel of the docking station, and locate the monitor port.
3 Plug the RGB signal cable into the monitor port, and make sure it is
connected to the projector.
4 Plug the audio cable into the green Headphone jack on the right side of the
computer, and make sure it is connected to the projector.
5 Plug the audio cable into the green Headphone jack on the right side of the
computer.
Connecting Projector to the Computer
Projector
Power cord
To Headphones
Audio cable
To Monitor
RGB signal cable
(optional)
(optional)