Karcher B 60 W Bp Pack - Manual (Page 29)

– 7
 Release parking brake (optional); move
the pedal downward and turn to the left.
Then let the pedal move upwards.
 Drive the machine.
Forwards:
Press the driving lever to the front.
Backward:
Press the driving lever to the rear.
Note
The machine moves only when the driving
lever is moved by 15°.

Set the working speed.
– Forwards:
Turn the info button clockwise until
"CleanSpd Fwd=xxx%" is displayed.
– Backward:
Turn the info button clockwise until
"CleanSpd Rev=xxx%" is displayed.
Note
If the info button is not pressed for 10 sec-
onds the display toggles to the battery dis-
play.
– Shortly press the info button - display
blinks.
– Set the speed by turning the info button.
The value can be set in increments of
10% between 30% and 100%.
– Press the info button to confirm the set
value.
 Stop the machine: Release driving le-
ver.
 Open cover.
 Fill fresh water (maximum 60 °C) until
the lower edge of the filling nozzle.
 Close the lid.
ṇ
Warning
Risk of damage. Only use the recommend-
ed detergents. With respect to different de-
tergents the operator bears the increased
risk regarding the operational safety and
danger of accident.
Only use detergents that are free from sol-
vents, hydrochloric acid and hydrofluoric
acid.
Follow the safety instructions for using de-
tergents.
Note
Do not use highly foaming detergents.
Recommended detergents:
Filling in detergents
Fresh water
Detergent
Application Detergent
Routine cleaning of all wa-
ter resistant floors RM 745
RM 746
Routine cleaning of glossy
surfaces (e.g. granite) RM 755 es
Routine cleaning and ba-
sic cleaning of industrial
floors RM 69 ASF
Routine cleaning and ba-
sic cleaning of fine stone-
ware tiles RM 753
Routine cleaning of tiles in
sanitary areas RM 751
Cleaning and disinfection
in sanitary areas RM 732
Removal of coating from
all alkali-resistant floors
(e.g. PVC) RM 752
Removal of coating from li-
noleum floors RM 754
29 EN