Operation – Karcher B 60 W Bp Pack User Manual
Page 28
– 6
–
Adding water to the battery in its dis-
charged state can cause the acid to
leak.
–
Use safety glasses while handling bat-
tery acid and follow the safety instruc-
tions to avoid personal injury or damage
to clothes.
–
Should the acid spray on to the skin or
clothes, rinse immediately with lots of
water.
Caution
Risk of damage!
–
Use only distilled or desalinated water
(EN 50272-T3) for filling the battery.
–
Do not add any substances (so-called
performance improving agents), else
warranty claims will not be entertained.
ṇ
Warning
Only use maintenance-free batteries while
replacing batteries in package appliances.
Insert the vacuum bar into the vacuum
bar suspension in such a manner that
the profiled sheet is positioned above
the suspension.
Tighten the cross-handles.
Insert the suction hose.
ƽ
Danger
Risk of injury. Press emergency-stop
switch to immediately switch off all func-
tions of the machine.
Insert batteries and connect (see "Be-
fore Start-up").
Place long lateral boards of the packag-
ing as a ramp next to the pallet.
Fix the ramp on the pallet with nails.
Place short boards as a support under-
neath the ramp.
Remove the wooden bars in front of the
wheels.
Lift cleaning head with pedal and re-
move the carton packing.
Set main switch to “1”.
Press the driving lever and slowly move
the machine down from the ramp.
Set main switch to “0”.
ƽ
Danger
Risk of injury. Press on the foot pedal only
with one foot. The other foot must firmly be
placed on the floor. Press emergency-stop
switch to immediately switch off all func-
tions of the machine.
Caution
Risk of damage. The vacuum bar must be
liften to move in reverse direction.
Note
The machine is designed in such a way that
the brush head protrudes on the right. This
helps in working in a proper way even close
to the edges.
Release emergency-stop button by
turning.
Insert key in key switch at the operator
console and turn to "1".
Installing the Vacuum Bar
Unloading
Operation
Driving
28
EN