elektraLite CP20 - Manual (Page 54)

53
Fixture Default Settings
Every fixture in the CP20 library has each channel (feature) set to one of three different modes.
The modes are Crossfade (0), Snap Before (1), or Snap After (2). Listed below is the feature name and it’s
default setting. If you want to change these settings you can. Just check out pages 34 and 35 to learn how to
change them.
Feature/Channel Default
Setting Feature/Channel Default Setting
Pan Crossfade Color wheel Snap After
Tilt Crossfade Frost Snap After
Dimmer Crossfade Prism Snap After
RGB/CYM Crossfade Wash Snap After
Zoom Crossfade Hue Snap After
Focus Crossfade Color Rotate Snap After
Iris Crossfade Beam Shaping Snap After
Lamp On Snap After Prism Rotate Snap After
Speed Snap After Shake Snap After
Shutter Snap After Size Snap After
Strobe Snap After Gobo wheel Snap After
Control Snap After Effects wheel Snap After
Mirror Forward Snap After Saturation Snap After
Mirror Reverse Snap After Gobo Rotation Snap After
Type Snap After Effects Rotation Snap After
Home Snap After
Cmode Snap After
Gmode Snap After
Color FX Snap After
Color Function Snap After
Gobo Function Snap After
Macro Snap After
Gobo Rotate Function Snap After
Reset Snap After
Pan Frequency Snap After
Pan Amplitude Snap After
Tilt Frequency Snap After
Tilt Amplitude Snap After
Pan & Tilt Frequency Snap After
Null Snap After
Function Snap After
Shape Snap After
Macro Snap After
Movement type Snap After
Program Selection Snap After
Step Selection Snap After
Enter Snap After
Chapter
12