Hubbardton Forge 136403 - Manual (Page 4)

Assembly & Installation Instructions
A235
For Axis Pendant 13-6403 & 13-6403F Page 4 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24159
To Install Bulbs and Bottom Assembly (Figure 6)
Component Parts
A Screws (3)
B Locking Screw
C Upper
Assembly
D Lower Assembly
1. Install light bulbs. “F” version bulbs are included.
2. Raise lower assembly (D) with glass installed so vertical bars
pass through openings in the upper assembly (C) and screws (A)
pass through the larger end of the three slots.
3. Turn lower assembly (D) until it stops in the locked position.
4. Tighten the three screws (A).
5. Install and tighten locking screw (B).
6. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 6)