Hubbardton Forge 205651D User Manual

B298, Installation instructions

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

28859

Installation Instructions

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

Please Note: This fixture is designed to be mounted on a standard

wall surface and may not be suitable for all applications. If installing in

a non-wood frame application, we recommend consulting a qualified

builder or electrician.

To Mount Fixture to Wall and Install Glass

(Figure 1)

Component Parts

A Glass

D Decorative Cage

B Ground Screw

E Mounting Screw (2)

C Crossbar

F Fixture Back

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX
PRIOR TO INSTALLATION.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the cross-

bar (C) to the electric box making sure that fixture mounting

holes are level.

Note: A new electric box comes with screws. When replacing a
fixture, retain the existing screws for use with the new fixture.

3. Hold the fixture assembly (F) close to the wall and using

suitable wire connectors, not provided, connect two sets

of fixture wires to supply (whites to white and blacks to

black). Run a pigtail lead from crossbar ground screw (B)

to the junction box and connect all ground wires (bare cop

per or green to bare copper or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRE IS EXPOSED.

4. Push fixture assembly firmly to wall, making sure that no

wires are pinched between fixture back and wall. Align

mounting screws (E) with holes in fixture back and thread

into crossbar (C) until fixture is tight against the wall.

B298

Gothic Arches Sconce LED 205651D

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Continued)