A250, Assembly & installation instructions – Hubbardton Forge 134901 User Manual
Page 4

Assembly & Installation Instructions
A250
Staccato Six Light Pendant 13-4901
Page 4 of 4
Hand-Forged,
Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735
21041 Rev A
Install Bulb and Glass
(Figure 6)
Component Parts
P Socket
(6)
Q Bulb
(Included)(6)
R Glass
(6)
S Retaining Ring (6)
T Retaining Ring Tool
1. Remove retaining rings (S) from sockets (P) and set aside for later use.
Retaining rings are shipped installed on the sockets.
2. Install light bulb (Q). Be careful not to touch bulb with bare hands; oil from the
hands will dramatically reduce bulb life.
3. Slip glass (R) over socket (P) and thread retaining ring (S) onto socket (P) using
provided retaining ring tool (T). Repeat for all six sockets.
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 6)