Allied Telesis AT-2746FX - Manual (Page 33)

Network Adapter Card Installation Guide
33
Operating Specifications Wavelength: 1310 nm
Output power - 50/125 micron
cabling:
Minimum: -22.5 dBm
Maximum: -14 dBm
Output power - 62.5/125 micron
cabling:
Minimum: -19.0 dBm
Maximum: -14 dBm
Input sensitivity:
Minimum: -31 dBm
Maximum: -14 dBm
Wake on LAN Feature
AT-2745FX Series Supported on 100Base-FX port
only.
AT-2746FX Series Supported on both ports.
Default Setting Disabled
BootPROM Chip and MBA Feature
AT-2745FX Series Optional
AT-2746FX Series Standard
Default Port 100Base-FX
Load Balancing and Fail-over Protection
AT-2745FX Series Not supported
AT-2746FX Series
Supported
2
Default setting: Disabled
1. Numerous factors, such as too many splices or poorly implemented splices,
can significantly reduce the maximum distance of a fiber optic port. Fiber optic
cable should only be installed by a qualified fiber optic cable contractor.
2. Microsoft Windows 2000, 2003, and XP.
Table 8. AT-2745FX and AT-2746FX Series Network Adapter
Cards (Continued)