Allied Telesis AT-2746FX - Manual (Page 117)

Network Adapter Card Installation Guide
117
2. Select the Adapters tab.
The Adapters tab of the Network window is shown in Figure 72.
Figure 72. Adapters Tab Window
3. Select the Allied Telesyn network adapter card whose driver you want
to remove.
4. Select Remove.
5. If prompted, select Yes to confirm that you want to remove the adapter
driver. The Adapters tab is displayed again, without the icon for the
network adapter card.
6. Select OK.
7. If prompted to restart the system, select No.
Note
If you select Yes, Windows NT 4.0 will attempt to reload the adapter
driver.