Allied Telesis AT-2746FX - Manual (Page 172)

Chapter 9: AT-MUX Multiple VLAN Protocol
172
b. Select or enter the new VLAN ID, then select OK. The range is 0 to
4094.
A new local area connection for the VLAN is added to Current
VLANs in the Allied Telesyn Multi-VLAN Support Protocol
Properties window, shown in Figure 106 on page 171.
c. Repeat Steps a. and b. to add more VIDs, if needed.
d. Once you have finished adding VIDs, select OK to return to the
Network Connections window, shown in Figure 103 on page 168.
The window will now include new LAN connections for the new
VIDs.
5. To change the VID of an existing LAN connection, do the following:
a. From the Allied Telesyn Multi-VLAN Support Protocol Properties
window, click the LAN connection whose VID you want to change
and click Set ID.
The Set VLAN ID window, shown in Figure 107 on page 171, is
displayed.
b. Select or enter the new VID for the LAN connection and click OK.
The VID of the LAN connection is modified.
c. Repeat Steps a. and b. to change the VIDs of other LAN
connections, if needed.
d. Once you have finished modifying the VIDs, select OK to return to
the Network Connections window.
6. To delete a VID, do the following:
a. From the Allied Telesyn Multi-VLAN Support Protocol Properties
window, select the LAN connection of the VLAN you want to delete
and select Remove.
A confirmation prompt is displayed.
b. Select OK.
The selected VLAN connection is deleted.
c. Repeat Steps a. and b. to delete additional VLAN connections, if
needed.
d. Once you have finished deleting the LAN connections, select OK
to return to the Network Connections window. The LAN
connections of the deleted VIDs are removed from the window.