Allied Telesis AT-2746FX - Manual (Page 171)

Network Adapter Card Installation Guide
171
The Allied Telesyn Multi-VLAN Support Protocol Properties window is
shown in Figure 106.
Figure 106. Allied Telesyn Multi-VLAN Support Protocol Properties
Window
Note
To add a new VLAN connection, go to Step 4. To change a VID of
an existing VLAN connection, go to Step 5. To delete a VLAN
connection, go to Step 6.
4. To add a new VID, do the following:
a. In the Allied Telesyn Multi-VLAN Support Protocol Properties
window, select Add.
Note
You can ignore the “Not pass Windows Logo testing...” messages.
The Set VLAN ID window is shown in Figure 107.
Figure 107. Set VLAN ID Window
2