Allied Telesis AT-2746FX User Manual
Page 114

Chapter 4: Microsoft Windows NT 4.0
114
13. Select OK.
The Adapters tab in the Network window is shown in Figure 69.
Figure 69. Adapters Tab
14. Verify that your new Allied Telesyn network adapter card appears in
the list, then select OK.
Note
Windows NT 4.0 prompts you to configure the protocols that you will
be using for network communications.
15. Restart your computer when prompted.
This completes the procedure for installing the adapter driver on a
Microsoft Windows NT system.
This manual is related to the following products: