Removing the at-mux protocol – Allied Telesis AT-2746FX User Manual
Page 173

Network Adapter Card Installation Guide
173
Removing the AT-MUX Protocol
This procedure removes the AT-MUX protocol from a system. You do not
need to delete any existing VLAN connections prior to removing the
protocol. The connections are automatically deleted when the protocol is
removed.
To remove the AT-MUX protocol, perform the following procedure:
1. From the desktop, right-click the My Network Places icon and select
Properties from the menu.
The Network Connections window is shown in Figure 103 on page
168.
2. Right-click on the adapter’s local area connection and select
Properties from the pop-up menu.
Note
You must select the network adapter card’s LAN connection icon.
You cannot remove the protocol using the LAN connection of a
VLAN.
The Local Area Connection Properties window is shown in Figure 101
on page 167.
3. Select Allied Telesyn Multi-Vlan Support Protocol.
4. Select Uninstall.
The AT-MUX protocol is removed from the system. This completes the
procedure for removing the AT-MUX protocol.