Allied Telesis AT-S70 - Manual (Page 91)

AT-S70 Management Software User’s Guide
91
Configuring OAM Operations
To configure the OAM operations, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, as shown in Figure 36, is
displayed.
Figure 36. Module Status and Configuration Menu (1/2)
2. Select a line card on which you want to configure.
3. Press .
The Module Configuration Menu, as shown in Figure 37, is displayed.
Module Status and Configuration
Converteon
Module Status Link(A) Link(B) OpMode
1: AT-CV5M01 On Offline
2: AT-CM202 On Offline Offline Link Test
3: AT-CM202 On Offline Offline Link Test
4:(Not Inserted) -- -- -- --
5: AT-CM202 On Offline Offline Link Test
6: AT-CM202 On Offline Offline Link Test
7: AT-CM202 On Offline Offline Link Test
8:(Not Inserted) -- -- -- --
9: AT-CM212A/1 On Offline Offline Link Test
10:AT-CM212A/1 On Offline Offline Link Test
11:AT-CM212A/1 On Offline Offline Link Test
12:(Not Inserted) -- -- -- --
13:AT-CM212B/1 On Offline Offline SML
14:AT-CM212B/1 On Offline Offline SML
15:AT-CM212B/1 On Offline Offline SML
16:(Not Inserted) -- -- -- --
More ...
Return to Main Menu ...