Allied Telesis AT-S70 - Manual (Page 75)

AT-S70 Management Software User’s Guide
75
Link
Displays the status of the link state on the ports.
ˆ Online - Indicates that there is a valid link.
ˆ Offline - Indicates that there is no link.
Speed
Displays the operating speed of the ports.
Possible values are:
ˆ Fiber port (Port A) - 10M or 100M
ˆ Copper port (Port B) - Auto, 10M, or 100M
Mode
Displays the duplex mode of the ports. Possible values are:
ˆ Auto - The port is auto-negotiating with the connected device to
automatically configure to the highest common setting.
ˆ Full - The module can send and receive data simultaneously.
ˆ Half - The module can send or receive data, but not both at the
same time.
RX/ACT
Displays the status of the RX/ACT state on this port. Possible values
are:
ˆ On - The status report of the RX/ACT state on the port is turned
ON.
ˆ Off - The status report of the RX/ACT state on the port is not active.
Module Name
Displays the name that given to the line card selected. Left blank if it
has not been given a name.
4. Press or select the “Return to ...” option at the bottom of the
menu, to save the settings and return to the previous menu.