Allied Telesis Broadcom Advanced Control Suite 3 - Manual (Page 78)

Chapter 2: Configuring Teaming
78
Saving and Restoring the Configuration
This section provides procedures to save and restore the teaming
configuration.
To save the configuration, do the following:
1. From the File menu, select Team Save As.
2. Type the path and file name of the new configuration file, and then
click Save (a .bcg extension is added).
The configuration file is a text file that can be viewed with any text
editor. This file contains information about both the adapter and the
team configuration.
To restore a configuration, do the following:
1. From the File menu, select Team Restore.
2. Click the name of the file to be restored, and then click Open.
Note
If necessary, browse to the folder where the file is located.
3. Click Apply.
4. Click Yes when the message is displayed indicating that the network
connection will be temporarily interrupted.
If a configuration is already loaded, a message is displayed that asks if
you want to save your current configuration.
5. Click Yes to save the current configuration. Otherwise, the
configuration data that is currently loaded is lost.