Allied Telesis Broadcom Advanced Control Suite 3 - Manual (Page 67)

Broadcom Advanced Control Suite 3 User’s Guide
67
5. Click the Create Team tab.
The Manage Load Balance Members Page is displayed. See
Figure 32.
Note
The Create Team tab appears only if there are team-ready adapters
available.
6. Click the Team Name field to enter a team name.
7. Click the Team Type field to select a team type.
8. Click Manage Members at the top of the window.
The Manage Load Balance Members Window is displayed. See
Figure 33.
Figure 33. Manage Load Balance Members Window
9. Assign any available adapter or adapters to the team by moving the
adapter from the Available Adapters list at the top of the window to
the Load Balance Members list at the bottom of the window.
There must be at least one adapter in the Load Balance Members
list.
10. You can assign any other available adapter to be a standby member
by selecting it from the Standby Member list.