Allied Telesis Broadcom Advanced Control Suite 3 - Manual (Page 52)

Chapter 2: Configuring Teaming
52
support and are configured for the feature. If this is the case, then the
team offload capabilities appear on the bottom of the screen.
Note
Adding a network adapter to a team where its driver is disabled may
negatively affect the offloading capabilities of the team which, in
turn, may have an impact on the team's performance. Therefore, it is
recommended that only driver-enabled network adapters are added
as members to a team.
Figure 18. Creating/Modifying a Team: Assigning Team Members Page
10. If you want to designate one of the adapters as a standby member,
select Use the following member as a standby member, then
choose the standby member from the list of adapters.
This step is optional.
11. The Auto-Fallback Disable mode feature allows the team to continue
using the standby member rather than switching back to the primary
member if the primary member comes back online. To enable this
feature, select Enable Auto-Fallback Disable mode. Click Next.