Allied Telesis Broadcom Advanced Control Suite 3 - Manual (Page 56)

Chapter 2: Configuring Teaming
56
Note
All of the member IP addresses must be in the same subnet as the
subnet of the probe targets.
Figure 22. Creating/Modifying a Team: Configuring LiveLink Page
(continued 2)
17. If you want to create a VLAN on the team, select Add VLAN, or if you
want to change the settings of an existing VLAN, select Edit VLAN,
then click Next.
The Creating/Modifying a VLAN: Configure VLAN Support Page is
supported. See Figure 23 on page 57. If you do not want to create or
edit a VLAN, select Skip Manage VLAN, then click Next, and continue
with the wizard from the Finish screen (see step 22 of this procedure).
VLANs enable you to add multiple virtual adapters that are on different
subnets. The benefit of this is that your system can have one network
adapter that can belong to multiple subnets.