Allied Telesis Broadcom Advanced Control Suite 3 - Manual (Page 22)

Chapter 1: Starting and Using BACS 3
22
Slot No
Indicates the slot number on the system board occupied by the adapter.
This item is not available for PCI Express type adapters.
Bus Speed (MHz)
Indicates the bus clock signal frequency used by the adapter. This item is
not available for PCI Express type adapters.
Bus Width (bit)
Indicates the number of bits that the bus can transfer at a single time to
and from the adapter. This item is not available for PCI Express type
adapters.
Bus No
Indicates the number of the bus where the adapter is installed.
Device No
Indicates the number assigned to the adapter by the operating system.
Function No
Indicates the port number of the adapter. For a single-port adapter, the
function number is 0. For a two-port adapter, the function number for the
first port is 0, and the function number for the second port is 1.
Interrupt Request
Indicates the interrupt line number that is associated with the adapter.
Valid numbers range from 2 to 25.
Memory Address
Indicates the memory mapped address that is assigned to the adapter.
Note
The value of the Memory Address parameter cannot be 0.
Viewing Hardware Information
The Hardware section of the Information tab displays information about
the hardware settings for the selected network adapter.