Allied Telesis Broadcom Advanced Control Suite 3 - Manual (Page 32)

Chapter 1: Starting and Using BACS 3
32
Figure 11. Advanced Page
802.1p QOS
Enables the quality of service (QoS) feature, which is an Institute of
Electrical and Electronics Engineering (IEEE) specification that treats
different types of network traffic diversely to ensure required levels or
reliability and latency according to the type of traffic. This property is
disabled by default. Unless the network infrastructure supports QoS, do
not enable this property. Otherwise, problems may occur.
Ethernet@Wirespeed
Enables a Gigabit Ethernet adapter to establish a link at a lower speed
when only two pairs of wires are available in the cabling plant. The default
setting for this property is Enabled.