Managing rmon statistics, Viewing rmon statistics – Allied Telesis AT-S94 User Manual
Page 220
Page 220
Allied Telesis
AT-S94 Management Software Web Browser Interface User’s Guide
–
No Refresh — Indicates that the Etherlike statistics are not refreshed.
•
Frame Check Sequence (FCS) Errors — Displays the number of FCS errors received on the selected
interface.
•
Single Collision Frames — Displays the number of single collision frames received on the selected
interface.
•
Late Collisions — Displays the number of late collision frames received on the selected interface.
•
Excessive Collisions — Displays the number of excessive collisions received on the selected interface.
•
Oversize Packets — Displays the number of oversized packet errors on the selected interface.
•
Internal MAC Receive Errors — Displays the number of internal MAC received errors on the selected
interface.
•
Received Pause Frames — Displays the number of received paused frames on the selected interface.
•
Transmitted Paused Frames — Displays the number of paused frames transmitted from the selected
interface.
2.
Select the Interface and the Refresh Rate. The selected interface’s Etherlike statistics are displayed.
To update the refresh time:
•
To change the refresh rate for statistics, select another rate from the Refresh Rate drop-down list.
To reset Etherlike interface statistics counters:
1.
Open the Etherlike Statistics Page.
2.
Click Clear All Counters. The Etherlike interface statistics counters are cleared.
Managing RMON Statistics
This section contains the following topics:
•
•
•
•
Viewing RMON Statistics
The RMON Statistics Page contains fields for viewing information about device utilization and errors that occurred
on the device. The RMON Statistics Page contains statistics for both received and transmitted packets.
To view RMON statistics:
1.
Click Statistics > RMON Statistics. The RMON Statistics Page opens: